Alamo 02979718C manual Assembly, There are obvious and hidden

ASSEMBLY

14.Adjust carriage bolt item 1 to obtain a com- pression at impact point of 1/8”-3/16” before STOP “S” hits the arm. Adjust return spring tension (Item 2) to obtain desired mower head return speed.

15.The Mower is now ready to operate. Read the operating instructions and safety instructions before putting the mower to work.

There are obvious and hidden

potential hazards in the operation of this mower. REMEMBER! This machine is often operated in rough terrain conditions and in heavy weeds. Serious injury or even death may occur unless care is taken to ensure the safety of the operator, bystanders, or passersby in the area.

CONTROL CABLE CONNECTION TO CONTROL STICK ASSEMBLIES

First remove the cross-screw from the bottom of the Control Stick Assembly. DO NOT remove the screws that fasten the two housing halves together.

Next, while holding the housing, fully shift the handle in the control stick assembly to expose the female- threaded end of the plunger rod.

UGR 04/06 Assembly Section 3-5

© 2006 Alamo Group Inc.

ASSEMBLY