Alamo A72B, A60B, 00759354C manual Assembly, Front Rubber Fabric Deflectors Standard Equipment

ASSEMBLY

ASSEMBLY

Deflectors: Front and Rear Deflectors (Standard Equipment) are recommended for the average user and will provide protection from thrown objects with proper operation under normal conditions. Deflectors must be maintained in good repair or replaced after no more than two inches of wear off lower edge.

Front Rubber Fabric Deflectors (Standard Equipment)

Front Deflector (Figure Asm-R-0085)

1.Attach the Front Bracket (1) to the front of the mower with 5/8" x 3" Bolts (3), Flatwashers (9) and Locknuts (4).

2.Attach the Front Deflector (2) to the Bracket with 3/8" x 1-1/2" Bolts (5), Woodwashers (8), Flatwashers (6), and Locknuts (7), as shown in

Figure Asm-R-0085.

Rear Rubber Fabric Deflectors (Standard Equipment)

Rear Deflector (Figure Asm-R-0086)

1.Attach the Right and Left Deflector Weldment (1 & 2) to the mower deck using 1/2" x 1-1/4" bolts

(5) and locknuts. Attach the Right and Left Deflector Weldments (1 & 2) together using 1/2" x 4" bolts (6), flatwasher (7) and locknuts.

2.Attach the Right and Left Mount Plates (9 & 10) to the mower deck and the Deflector Weldments using 1/2" x 1-1/4" bolts, flatwasher and locknuts.

3.Attach the Deflector Panels (3) to the Deflector Weldments using Deflector Bar (4), 1/2 x 1-1/4" bolts, and locknuts.

A60B/A72B 02/07 Assembly Section 3-4

©2007 Alamo Group Inc.