(SGM-10)

OPERATION

7.1 Skid Steer Pre-Operation Inspection/Service

Refer to the skid steer operator’s manual to ensure a complete pre-operation inspection and scheduled service is performed according to manufacturer recommendations. The following is a partial list of items requiring inspection:

Tire condition/air pressure

Wheel lug bolts

SMV sign is clean and visible

Skid Steer lights are clean and functional

Skid Steer Seat belt is in good condition

Skid Steer operator enclosure is in good condition

Operator front protective door condition

No oil leaks

Radiator free of debris

Engine oil level and condition

Engine coolant level and condition

Hydraulic oil level and condition

Fuel condition and level

Sufficient lubrication at all lube points

Air filter condition

7.2 Mower Pre-Operation Inspection/Service

Before each mower use, a complete inspection and service is required to ensure the mower is in a good and safe working condition. Damaged and/or broken parts should be repaired and/or replaced immediately. To ensure the mower is ready for operation, conduct the following.

All Safety Shields, Guards and Safety devices including (but not limited to) - the Deflectors, Chain Guards and Height Limiting Safety Chain should be used and maintained in good working condition. All safety devices should be inspected carefully at least daily for missing or broken components. Missing, broken, or worn items must be replaced at once to reduce the possibility of injury or death from thrown objects, entanglement, or blade contact. (SPU-28)

Replace bent or broken blades with new blades. NEVER ATTEMPT TO STRAIGHTEN, WELD, OR WELD HARDFACING ON BLADES SINCE THIS WILL LIKELY CRACK OR OTHERWISE DAMAGE THE BLADE WITH SUBSEQUENT FAILURE AND POSSIBLE SERIOUS INJURY FROM THROWN BLADES.

SL72 03/08

Operation Section 4-11

© 2008 Alamo Group Inc.

OPERATION

Page 93
Image 93
Alamo SL72 manual Skid Steer Pre-Operation Inspection/Service, Mower Pre-Operation Inspection/Service