Albatron Technology PX845PEV-800 manual Floppy Disk Connector FDC, Hard Disk Connectors IDE1/ IDE2

Albatron Anniversary Special Edition PX845PEV-800

Floppy Disk Connector: FDC

This mainboard provides a standard floppy disk connector (FDC) that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy diskettes. This connector supports the floppy drive ribbon cables provided in the packaging.

Hard Disk Connectors: IDE1/ IDE2

This mainboard has a 32-bit Enhanced PCI IDE Controller that supports PIO Mode 0~4, Bus Master, Ultra DMA / 33, Ultra DMA / 66,and Ultra DMA / 100. It has two HDD connectors, IDE1 (primary) and IDE2 (secondary).

IDE1 (Primary IDE Connector)

You can connect up to two hard drives to IDE1. If you attach two drives, you must use a ribbon cable with three connectors. You must also configure one drive as the master and one drive as the slave, using the jumpers located on each drive.

IDE2 (Secondary IDE Connector)

The IDE2 controller can also support a Master and a Slave drive. The configuration is similar to IDE1. The second drive on this controller must be set to slave mode.

FDC

PhoenixPCI5

Bios

	IrDA
	FDC
	USB2
	USB3		CHASFAN
SW/LED	SPEAKER	CASE OPEN		JP1

	LAN CHIP					PRT/COM		KB/MS
PCI4	PCI3	PCI2	PCI1	Winbond W83627H F	ATX		USB/LAN
					12V

AGP AUXFAN 82845PE Intel U10 So cket 478 U6

Intel 82801DB U17 BAT1 CPUFAN

DIMM1

DIMM2

DIMM3

IDE2	ATX_PWR
IDE1

IDE2

IDE1

17