Albatron Anniversary Special Edition
Advanced Chipset Features
DRAM Timing Selectable
This item determines DRAM clock/ timing using SPD or manual configuration. Make sure your memory module has SPD (Serial Presence Data), if you want to select the <By SPD> option. Options: Manual, By SPD (default).
CAS Latency Time
This item determines CAS Latency. When synchronous DRAM is installed, the number of clock cycles of CAS latency depends on the DRAM timing. Do not reset this field from the default value specified by the system designer. Options: 1.5,2,2.5 and By SPD (default).
Active to Precharge Delay
This item allows you to select DRAM Active to Precharge Delay. Options: 7, 6, 5, By SPD (default).
DRAM RAS# to CAS# Delay
This item allows you to select a delay time between the CAS and RAS strobe signals. It only applies when DRAM is written to, read from, or refreshed. Options: 3,2 and default is by SPD.
DRAM RAS# Precharge
This item allows you to select the DRAM RAS# precharge time. The ROW address strobe must precharge again before DRAM is refreshed. An inadequate configuration may result in incomplete data. Options: 3,2 and By SPD (default).
Refresh Mode Select
Select the refresh mode. Options: 15.6 us, 7.8 us, 64 us, Auto (default).
System BIOS Cacheable
When enabled, accesses to system BIOS ROM addressed at
Video BIOS Cacheable
Select “Enabled” to allow caching of the video BIOS which may improve performance. If any other program writes to this memory area, a system error may result. Options: Enabled, Disabled (default).
Memory Hole at
When enabled, you can reserve an area of system memory for ISA adapter ROM. When this area is reserved, it cannot be cached. Refer to the user documentation of the peripheral you are installing for more information. Options: Disabled (default), Enabled.
Delayed Transaction
The chipset has an embedded
Delay Prior to Thermal
Select the delay time before thermal activation from high temperatures.
Options: 4 Min, 8 Min, 16 Min (default), 32 Min.
28
