Alcatel Sparq (T-Mobile) manual Getting started, Set-up, Installing or removing the battery

2 Getting started ......................................

2.1Set-up

Removing or installing the back cover

Inserting or removing the SIM card (1)

You must insert your SIM card to make phone calls.

Place the SIM card with the chip facing downwards and slide it into its housing. Make sure that it is correctly inserted.To remove the card, press the bottom and slide it out. Please power o￿ your cellphone before you remove the SIM card.

(1)Please use only TMobile approved SIM cards in your T-Mobile® Sparq™.

Installing or removing the battery

Insert and click the battery into place, then close the cellphone cover. Unclip the cover, then remove the battery.

Charging the battery

Connect the battery charger

•Charging may take about 20 minutes to start if the battery is flat.

•Be careful not to force the plug into the socket.

•Make sure the battery is correctly inserted before connecting the charger.

•The mains socket must be near to the cellphone and easily accessible (avoid electric extension cables).

17 18