1, Select the profile from the connection profile list; 2, Change the parameters;
3, Click <Save>;
Delete a profile:
1, Select the profile from the connection profile list; 2, Click <Delete>;
3, On the pop up dialog ”are you sure to delete this profile?”,click <OK>; Note: the default profile can not be deleted.
Set as default:
1, Select the profile from the connection profile list; 2, Click <Set default>;
3, On the pop up dialog ”are you sure to set this profile as default?”, click <OK>. Note: Once set the profile as default,(D) will be added as a mark.
3.3 Network
Network Mode:Automatic/3G only/2G only, default is automatic Network Selection: Automatic/Manual, default is automatic
Select a Network Manually
1,Choose Manual in the network selection; 2,Click <Apply>;
3,Click <Refresh> to list the available network; 4,Choose the network and Click <Select> to register;
Note: For the Services,3G+ (HSPA+),3G( HSUPA/HSDPA/UMTS),2G(Edge/GPRS); For the Status, Active( the network registered), Available( the network can be used).
3.4 PIN management
Enable PIN
1, When PIN is disable, click <Enable>, PIN input page is displayed; 2, Enter the PIN you want to set, only number is accepted; 3,Click <Apply>;
Disable PIN
1, When PIN is enable, click <Disable>, PIN input page is displayed; 2,Enter the correct PIN;
3,Click <Apply>;
Change PIN
1, When PIN is enable, click <Change PIN>,PIN input page is displayed; 2,Enter the Old PIN/New PIN/Confirm PIN;
6
