OmniSwitch Troubleshooting Guide September 2005 page -175
egress Logs information about packets leaving the switch.
rsvp Logs information about RSVP flows. Currently not supported.
balance Logs information about flows that are part of a load balancing cluster.
Not supported for the OmniSwitch 6624/6648.
nimsg Logs information about QoS interfaces.
Defaults
By default basic information messages are logged (info). Error messages are always logged.
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
•Use this command to troubleshoot QoS events on the switch.
•Use the no form of the command to change the type of messages that will be logged or to return debug-
ging to its default state.
Examples
-> debug qos flows queue
-> qos debug no flows no queue
-> debug no qos
Release History
Release 5.1; command was introduced.
MIB Objects
alaQoSConfigTable
alaQoSConfigDebug