PURE OPERATION
Press this button to start the electrical air purifying operation.
During air conditioner operation
a PURE button
PURE operation starts by pressing this button.
• The PURE indicator (blue) on the display panel of the indoor unit turns on.
• Plasma ion charger is activated.
To stop only PURE operation
PURE button
PURE operation stops by pressing this button.
• The PURE indicator (blue) on the display panel of the indoor unit turns off, while air a conditioner is operating.
• Plasma ion charger is deactivated.
To stop air conditioner operation at the same time
button
Air conditioner operation and PURE operation stop by pressing this button.
• The OPERATION indicator (green) and PURE indicator (blue) on the display panel of the indoor unit turn off.
CAUTION
•When the 
button is pressed the next time, operation starts with the combined air conditioner and PURE operation.
•During the combined air conditioner and PURE operation, air conditioner operation only cannot be stopped.
When the air conditioner is stopped
aPURE button
PURE operation starts by pressing this button.
• The PURE indicator (blue) on the display panel of the indoor unit turns on.
INFORMATION
•During PURE operation, a small amount of ozone is produced, and you might notice the smell.
•When the fan speed is automatic, it changes up to MED+ 
.
•During Hi POWER operation, the position of the vertical air flow louver changes to the high power position.
Hi POWER OPERATION
High power (Hi POWER)
•The Hi POWER (high power operation) mode automatically controls room temperature,
air flow and the operation mode so that the room is quickly cooled in summer and warmed in winter. () see page 19.)
Setting Hi POWER mode
aHi POWER button
Press the Hi POWER button. The Hi POWER mark on the remote controller is shown.
Canceling Hi POWER mode
aHi POWER button
Press the Hi POWER button once again.
The Hi POWER mark on the remote controller turns off.
CAUTION
The Hi POWER mode cannot be activated during DRY operation.
a
13 | EN |
