Manuals / Toshiba / Household Appliance / Air Conditioner

Toshiba RAS-07PKVP-E Preparation And Check Before Use, Loading the remote controller batteries

Models: RAS-07PKVP-E

1 32
Download 32 pages 16.62 Kb
Page 9
Image 9
PREPARATION AND CHECK BEFORE USE

PREPARATION AND CHECK BEFORE USE

Loading the remote controller batteries

aRemove the cover, and insert the batteries.

b Reattach the cover.

Removing the batteries

aRemove the cover, and take out the batteries. b Reattach the cover.

*Please dispose of the batteries according to the local regulation.

Batteries

•To replace the batteries, use two new batteries (AAA type).

•The batteries will last about one year under normal usage.

•Replace the batteries if there is no receiving beep from the indoor unit or when the air conditioner cannot be operated using the remote controller.

•To avoid malfunctions due to battery leakage, remove the batteries when not using the remote controller for over one month.

•Slide off the cover while pressing the sides.

•Battery replacement

Be careful not to reverse the (+) position and the (–) position.

Setting the clock

Before you start operating the air conditioner, set the clock of the remote controller using the procedures given in this section. The clock panel on the remote controller will indicate the time regardless of whether the air conditioner is in use or not.

Initial setting

When batteries are inserted in the remote controller, the clock panel displays AM 0:00 and flashes.

aON ON button (or OFF OFF button)

Press the ON ON button (or OFF OFF button) to set the current time.

Each press of the ON button (or OFF button) changes the time in one minute increments.

Holding down the ON button (or OFF button) changes the time in ten minute increments.

bSET SET button

Press the SET SET button.

The current time is displayed and the clock starts.

b a

7

EN

Page 8 Page 10
Page 9
Image 9
Toshiba RAS-07PKVP-E Preparation And Check Before Use, Loading the remote controller batteries, Removing the batteries
Page 8 Page 10

FAQ

How do I load the remote controller batteries?

To load the remote controller batteries, remove the cover and insert the batteries. Then reattach the cover.

How do I replace the batteries?

To replace the batteries, remove the cover, take out the batteries, and then reattach the cover. Dispose of the batteries according to local regulations.

How do I set the clock on the remote controller?

Before operating the air conditioner, set the clock of the remote controller using the procedures given in this section. The clock panel on the remote controller will indicate the time regardless of whether the air conditioner is in use or not.