AUTO RESTART OPERATION
This air conditioner is equipped with an automatic restarting function which allows the air conditioner to resume without the use of the remote controller under the operating settings in the event of a power shutdown. Operation resumes without warning 3 minutes after power is restored.
INFORMATION
The AUTO RESTART OPERATION is not set to work at factory shipment, and so it is necessary to set it to this function if required.
HOW TO SET AUTO RESTART
To set the auto restart function, proceed as follows:
The power supply to the unit must be on. The function will not be set if the power is off. To enable the auto restart function, hold down the RESET button for 3 seconds.
The air conditioner receives the setting and beeps 3 times. Now the auto restart setting is activated. The system can restart automatically.
(1)When the air conditioner is in
•The air conditioner starts to operate. The green indicator turns on.
•After about 3 seconds, the air conditioner beeps 3 times.
The green indicator flashes for 5 seconds.
•The air conditioner is operating.
If the air conditioner is not required to run at this time, push the RESET button again or use the remote controller to stop the air conditioner.
(2)When the air conditioner is operating.
Hold down the RESET button for 3 seconds or more.
•The air conditioner stops operating. The green indicator turns off.
•3 seconds after pushing the button, the air conditioner beeps 3 times.
The green indicator flashes for 5 seconds
RESET button
• The air conditioner stops.
If you do not need the air conditioner to stop at this time, use the remote controller to restart the air conditioner. During the subsequent operation, the green indicator is turned on.
•The auto restart operation will not accept a command if timer operation with the remote controller is activated.
•After restarting the air conditioner by the AUTO RESTART OPERATION, the louver swing (AUTO) operation resumes.
HOW TO CANCEL AUTO RESTART
To cancel the auto restart operation, proceed as follows:
Repeat the setting procedure. The air conditioner receives the setting and beeps 3 times. Now the auto restart setting is cancelled.
The air conditioner needs to be manually restarted with the remote controller after the main supply is turned off.
(1)When the air conditioner is in
• The air conditioner starts to operate. The green indicator will turn on.
•After about 3 seconds, the air conditioner beeps 3 times.
•The air conditioner is operating.
If the air conditioner is not required to run at this time, push the RESET button again or use remote controller to stop the air conditioner.
(2) When the air conditioner is operating.
Hold down the RESET button for 3 seconds or more.
•The air conditioner stops operating. The green indicator is turned off.
•After about 3 seconds, the air conditioner beeps 3 times.
•The air conditioner stops.
If you do not need the air conditioner to stop at this time, use the remote controller to restart the air conditioner.
During subsequent operation, the green indicator is turned on.
RESET button
INFORMATION
Do not hold down the RESET button for more than 10 seconds. Otherwise, the forced cooling operation used during servicing and
To stop the forced cooling operation, press the RESET button again.
EN | 18 |
