Toshiba RAS-07PKVP-E owner manual How The Air Conditioner Works, Information, Automatic Operation

Models: RAS-07PKVP-E

1 32
Download 32 pages 16.62 Kb
Page 21
Image 21
HOW THE AIR CONDITIONER WORKS

HOW THE AIR CONDITIONER WORKS

Automatic Operation

As shown in Figure 1, Automatic Operation mode selects the operation based on the room temperature data when operation begins.

Room temperature when operation begins or when selected again

Room temperature

Setting temperature+1

Setting temperature

Setting temperature–1

Cooling operation

Fan only operation

Heating operation

Figure 1

The operation mode is selected again after the compressor has remained stopped for 15 minutes.

Hi POWER operation

When you press the Hi POWER button during cooling, heating or A operation, the air conditioner starts the following operation.

Cooling operation

The cooling operation is performed at 1°C lower than the temperature setting. The fan speed is also set to high*.

*The noise level raises, according to the fan speed.

Heating operation

The heating operation is performed at 2°C higher than the temperature setting. The fan speed is automatically switched according to the operating condition.

SLEEP MODE operation

The air conditioner automatically controls the room temperature, air flow and noise level, to prevent overcooling in summer and maintain a warm and comfortable room in winter.

INFORMATION

The power and noise level are reduced during sleep mode, so the room may not be cooled sufficiently if the mode is used for a long period of time.

The sleep mode cannot be used during dry operation, PURE operation (independent operation).

(PURE operation (independent operation) is when the PURE button is pressed while the air conditioner is stopped to perform PURE operation by itself. The air conditioner does not operate at this time.)

If the FAN button is pressed during sleep mode, the sleep mode is canceled.

Sleep mode is not a timer operation.

Dry operation ( Automatic Operation )

The dry mode automatically selects the cooling dry operation based on the difference between the temperature setting and the actual room temperature.

The fan speed indicator shows AUTO, and low speed is used.

• The display panel indicators will decrease in brightness in sleep mode.

19

EN

Page 21
Image 21
Toshiba RAS-07PKVP-E How The Air Conditioner Works, Information, Automatic Operation, Hi POWER operation, Dry operation

FAQ

What is Automatic Operation mode?

Automatic Operation mode selects the operation based on the room temperature data when operation begins. It includes cooling operation, fan only operation, and heating operation.

What is Hi POWER operation?

Hi POWER operation activates high-speed cooling or heating operations, adjusting the temperature setting by 1C or 2C respectively. The noise level may increase accordingly.

What is SLEEP MODE operation?

SLEEP MODE operation automatically controls room temperature, air flow, and noise level to prevent overcooling in summer and maintain a warm and comfortable room in winter. It also reduces power and noise levels.