TIMER OPERATION
ON timer and OFF timer
Setting the ON Timer
aON ON button
Press the ON ON button. Set the timer to the desired time.
Each time the ON button is pressed, the time changes in ten minute increments. Holding down the ON button changes the time in one hour increments.
bSET SET button
Press the SET SET button to set the timer.
The timer time is displayed, and the timer starts.
cCLR CLR button
Press the CLR CLR button to cancel the timer setting.
Setting OFF Timer
aOFF OFF button
Press the OFF OFF button.
Set the timer to the desired time.
Each time the OFF button is pressed, the time changes in ten minute increments. Holding down the OFF button changes the time in one hour increments.
bSET SET button
Press the SET SET button to set the timer.
The timer time is displayed, and the timer starts.
cCLR CLR button
Press the CLR CLR button to cancel the timer setting.
.
b c a
| CAUTION |
• | When you select timer operation, the remote controller automatically transmits the timer signal to the indoor unit at the |
| specified time. Therefore, keep the remote controller in a location where it can transmit the signal to the indoor unit |
| properly. |
• | If you do not press the SET SET button within 30 seconds after setting the time, the setting will be cancelled. |
Once you select timer operation mode, the settings are saved in the remote controller.
Thereafter, the air conditioner will start operating under the same conditions as you adjusted by the ON or OFF button on the remote controller.
You cannot set the timer when the clock display is flashing.
Follow the instructions in the section “Setting the clock” on page 7 to set the clock, and then set the timer.
EN | 14 |