Using the 1:5 HDD Copy Cruiser IDE/SATA

Main Menu

Adv Setup

Adv Setup: Quick Erase HDD

This function is used to erase the data of a hard drive quickly.

Warning: Backup any important data before using this function.

1.Press and hold ESC for about three seconds to access the “Adv Setup” menu. The following screen will be displayed.

11. Adv Setup

ENT ESC

2.Use the arrow buttons (or) to select “Quick Erase HDD”. The following screen will be displayed.

11-04. Adv Setup Quick Erase HDD

ENT ESC

3.Press ENT, and then use the arrow keys () to select a hard drive to erase. An example is shown below.

1 Target CH:1 HDS721616PLA380

ENT ESC

4.Press ENT, and you will be prompted whether you wish to proceed. Use the arrow keys () to select “Yes” or “No”. The following screen will be displayed.

All data will be lost, erase? No

ENT ESC

5.Press ENT and the Quick Erase will begin. Once complete the following information will be displayed.

Erasing Target

The Selected HDD

Please Wait...

Erase Finished

 

 

 

www.aleratec.com41