Using the 1:5 HDD Copy Cruiser IDE/SATA
Main Menu
Adv Setup
Adv Setup: Full Erase HDD
This function is used to fully erase all data on the HDD.
Warning: Backup any important data before using this function.
1.Press and hold ESC for about three seconds to access the “Adv Setup” menu. The following screen will be displayed.
11. Adv Setup
ENT ESC
2.Use the arrow buttons (or) to select “Full Erase HDD”. The following screen will be displayed.
ENT ESC
3.Press ENT, and then use the arrow keys () to select a hard drive to erase. An example is shown below.
Full Erase HDD All
ENT ESC
4.Press ENT, and you will be prompted whether you wish to proceed. Use the arrow keys () to select “Yes” or “No”.
All data will be lost, erase? No
ENT ESC
5.Select “Yes”, press ENT and the Full Erase will begin. Once complete the following information will be displayed.
Erasing Target | | The Selected HDD |
Please Wait... | Erase Finished | |
|
|
|
42www.aleratec.com