Alesis 16 manual USB2.0 Recording, First-time connection and driver installation instructions

5USB2.0 Recording

Important: download the drivers from http://www.alesis.com onto a folder on your desktop or insert the software DVD into your computer’s DVD drive BEFORE you plug your MultiMix into your computer for the first time.

First-time connection and driver installation instructions

Windows

Before attaching your mixer to your computer, install the drivers either from the website or the software DVD. During the installation process, attach and re-attach your mixer as prompted by the install program.

For each of the several installations that occur, click “Continue Anyway” if Windows warns you that the drivers have not passed Microsoft Logo Certification.

Windows Logo Certification warning.

Ignore this warning by clicking “Continue Anyway.”

.

Macintosh

Install the driver from the .dmg file.

Wait to turn on/attach your MultiMix USB2.0 mixer to your Mac until after the Mac has fully booted. If you do not do so, your computer may not recognize the device.

You must select the “Alesis USB Audio Device” via your Mac’s “Audio MIDI Setup” utility in order for your computer to route the MultiMix USB2.0’s signals into and out of your computer applications properly.

These drivers include the two most popular standards for audio interfacing—WDM (the “Windows Driver Model” built by Microsoft) and ASIO (the “Audio Stream Input/Output” standard used by many audio software applications).

Mac OS X 10.4 or higher is required by the MultiMix drivers.

All digital audio carried over the USB2.0 connection is 24- bit PCM data.

25