3 A Tour of the Wildfire

accepts a 1/4” plug. Expression pedals may be purchased at your local Alesis dealer.

AUX (Auxiliary) INPUT

The AUX INPUT allows you to play along with your favorite songs! Just connect this RCA input to the output from your CD player, tape player or some other external audio device. The AUX INPUT level is fixed, but you can use the external audio device’s own volume control (for example, the headphone volume control on a portable CD player) to adjust the level of the signal coming into these jacks. When you turn the MASTER VOLUME knob, the level of this signal is affected as well.

STEREO LINK OUTPUT

To take full advantage of the on-board stereo effect processor, connect the STEREO LINK OUTPUT to the input of a second amplifier to create a true stereo setup. This jack accepts 1/4” TS cables.

SPEAKER OUTPUT

You can use the SPEAKER OUTPUT to connect the Wildfire to an external 8-ohm speaker with a 1/4” TS cable. This will disconnect the internal speaker.

See chapter 9 for detailed instructions on how to set up a stereo link between two amplifiers.

The SPEAKER OUTPUT is high- voltage and can easily damage normal recording, PA, and other line-level input stages, so do not connect this output to a recording device, a PA system, or the input of another Wildfire. Connect it only to an 8- ohm speaker.

16