6Storing & Copying Programs
To Store a Program
1.In PLAY or EDIT mode, press the VALUE knob. The display will flash the current program number.
2.Use the Program Up and Down buttons, VALUE knob or the optional footswitches to select the program number where the current program will be stored. If you want to save it in the same program number, you can skip this step.
3.Press the VALUE knob again to store the program in the selected place. The Wildfire then returns to the mode it was in before you began the store operation, and the destination program becomes the current program.
The store operation times out if you do nothing for more than five seconds. You also can abort the operation by turning the EFFECT knob to a different position.
To Copy a Program
To make a copy of an unedited program, select that program and then follow the steps outlined above to store it to a new location.
21