Please take a few minutes to read this manual before setting up your ProActive 5.1 system. It will help you optimize your listening experience.
Setting up your ProActive 5.1system: Satellite speakers
Important:
1.Subwoofer
2.Satellite speakers
3.Center channel speaker
4.Digital SoundTouch™ Control Center
5.Wireless remote control
6.
4
3
6
For your safety, set up the entire system before plug- ging it into a power source.
1
2
5
Before attaching the cables, position two satellite speakers on either side of your computer monitor or television about the same distance from each other as from you. Angle them to face you.
Place the rear speakers behind you and about the same distance apart as the front speakers. You may want to mount these speakers on the wall. If so, simply loosen the screws on the stands and rotate the stands 180°. Mount the speakers using appropriate wall anchors through the holes in the stands.
For a
Center channel
Depending on your configuration, place your
center channel speaker on your desk (angled up), on top of your monitor or television (angled down), or
Subwoofer
Because bass frequencies are
Note: Please ensure adequate ventilation around the subwoofer. Keep the cooling fins on the back of the subwoofer at least 3 inches away from any object. For your safety, the ProActive 5.1 system is protected by a thermal overload switch, which will cause the system to shut down if it becomes too hot. In rare circumstances where the ambient room temperature is high, the unit can shut down. If this occurs, turn off the system and allow it to cool. Increase the ventilation around the system before turning the power back on.
Digital SoundTouch™ Control Center
3
English
4
English