2.5” /4” U bolt and Anchor

Hardware Installation

Once you check off everything from the package, you can start to install the ODU. You can mount to a pipe, a pole or to the side of a building. The steps are showed in the following：

1.You must mount the ODU into the bracket first.

Note: ALL the 4 screws had been tightened onto the ODU and bracket

2.You can use the 2 or 4 inches U bolt to mount on the pipe, depending on the radius of the pipe. (Wall mounting is referred to Wall Mounting Figure) The two U bolts must be mounted tightly. Be aware of not over-tighten the U bolt.

Pipe Mounting Figure