The device provides 3 different operation modes and the wireless radio of device can act as AP/Client/WDS. The operation mode is about the communication mechanism between the wired Ethernet NIC and wireless NIC, the following is the types of operation mode.
RouterThe wired Ethernet (WAN) port is used to connect with ADSL/Cable modem and the wireless NIC is used for your private WLAN. The NAT is existed between the 2 NIC and all the wireless clients share the same public IP address through the WAN port to ISP. The default IP configuration for WAN port is static IP. You can access the web server of device through the default WAN IP address 172.1.1.1 and modify the setting base on your ISP requirement.
BridgeThe wired Ethernet and wireless NIC are bridged together. Once the mode is selected, all the WAN related functions will be disabled.
WISP (Wireless ISP)This mode can let you access the AP of your wireless ISP and share the same public IP address form your ISP to the PCs connecting with the wired Ethernet port of the device. To use this mode, first you must set the wireless radio to be client mode and connect to the AP of your ISP then you can configure the WAN IP configuration to met your ISP requirement.
The wireless radio of the device acts as the following roles.
AP (Access Point)The wireless radio of device serves as communications “hub” for wireless clients and provides a connection to a wired LAN.
AP ClientThis mode provides the capability to connect with the other AP using
This mode serves as a wireless repeater, the device forwards the packets to another AP with WDS function. When this mode is selected, all the wireless clients can’t
9