Configure DEV4:

1. Access the web server (http://192.168.2.254) of device from the Ethernet port.

Caution

If you configure multiple devices in the same PC, since the devices have the same default IP address but different MAC addresses, it may cause you can’t access the web server of device. If the situation happens, please try to clean the ARP table of your PC by DOS command “arp –d” then you can access the web server of device using the default IP address.

2. Use Wizard page to setup device.

3. Press “Next>>” button then set the “Operation Mode” to “Wireless ISP” mode.

4. Press “Next>>” button then disable “Time Zone” function.

23