User instructions, Description of the controls | Smeg STA643PQ

User instructions

User instructions

3. Description of the controls

3.1 Upper panel

All the dishwasher controls are grouped on the upper panel. Switch-on, programming, switch-off etc. procedures are only possible when the door is open.

1

ON/OFF BUTTON

Pressing this button energises the appliance.

SELECTED PROGRAM INDICATOR LIGHTS

2Illumination of this light denotes the program selected and the occurrence of a fault (troubleshooting).

PROGRAM SELECTION BUTTON

3By pressing this button in sequence it is possible to select the desired program.

4

5

6

7

SALT WARNING LIGHT

Illumination of this light signals that salt container is empty.

RINSE AID WARNING LIGHT

Illumination of this light signals that rinse aid dispenser is empty.

RAPID CYCLE OPTION BUTTON

This button can be pressed to reduce the duration of programs.

RAPID CYCLE OPTION LIGHT

Illuminates to indicate that the function is activated.

9

Image 10

Smeg STA643PQ manual User instructions, Description of the controls, Upper panel, On/Off Button, Program Selection Button

Contents

GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS Contents USES OTHER THAN THOSE DESCRIBED ABOVE Safety instructions1. Safety and operating instructions NEVER BE REMOVED THIS DISHWASHER MUST BE USED BY ADULTS AQUASTOP MODELS APPLIANCE 2. Installation and hook-up Installation instructions2.1 Water supply connection CONNECTING TO THE WATER SUPPLY DRAIN CONNECTION NEVER DISCONNECT THE PLUG BY PULLING ON THE POWER SUPPLY LEAD 2.2 Electrical connection and precautionsIF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD Fuse replacement FOR GREAT BRITAIN ONLY SELECTED PROGRAM INDICATOR LIGHTS User instructions3. Description of the controls 3.1 Upper panel “3/1” OPTION LIGHT 13 INFORMATION DISPLAY SETTING THE WASHING PROGRAM AND SWITCHING ON“3/1” OPTION BUTTON HALF LOAD BUTTON The RAPID CYCLE 6, “3/1” 8, HALF LOAD WASH 10 and DELAYED START DURATION POWERVery dirty pans MINUTES The correct amount of detergent has been added to the dispenser 3.2 Washing programsBefore starting a washing program make sure that RAPID CYCLES available in all programs except the soak program available in all programs except the soak program SELECTING HALF LOAD WASHDELAYED START available in all programs except the soak program TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT CANCELLING THE CURRENT PROGRAMCHANGING THE PROGRAM TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENT END OF CYCLE REMOVING THE DISHES 4. Operating instructions 4.1 Using the water softening system ADJUSTING THE WATER SOFTENING SYSTEM 4.2 Using the rinse aid and detergent dispensers WATER HARDNESS TABLE ADJUSTING THE RINSE AID DISPENSER SETTING ADDING THE RINSE AID ADDING THE DETERGENT During the washing cycle, the dispenser will be opened automatically User instructions Correct loading of the dishes helps ensure optimal washing results 4.3 General warnings and recommendationsMAKE SURE that the items being washed are dishwasher-safe Items which are not dishwasher-safe Dishes and objects in copper, tin, zinc or brass these tend to stain LOWER BASKET 4.4 Using the basketsLOADING THE LOWER BASKET CUTLERY BASKET UPPER BASKET LOADING THE UPPER BASKET Depending on the models, the basket may be equipped with some or all of the following accessories ADJUSTING THE UPPER BASKET Version B User instructions CLEANING THE SPRAY ARMS 5. Cleaning and maintenanceCLEANING THE WATER INTAKE FILTER 5.1 General warnings and recommendations PROLONGED DISUSE CLEANING THE FILTER UNITGENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE Fill the rinse aid dispenser Shut off the water supply tap BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE TROUBLESHOOTING MINOR PROBLEMSIf the dishes are not being cleaned properly, check that Reconnect the water intake hose and open the tap again If the dishes show signs of streaking, staining, etc., check that If the dishes fail to dry or remain dull, check thatIf there are visible traces of rust inside the tank Safety level 6. TroubleshootingFAULT E1 E2 E3 E4 E5 E6 Alternate washing system malfunction E7 E8 E9Turbine flow-regulator malfunction Water intake system malfunction Width TECHNICAL DATAElectrical characteristics Height depending on models Capacity Water supply pressure