Smeg STA643PQ User instructions, The RAPID CYCLE 6, “3/1” 8, HALF LOAD WASH 10 and DELAYED START

User instructions

PROGRAMME,	LOAD CROCKERY	PROGRAM
NUMBER & SYMBOL	AND CUTLERY	PROGRESS

DURATION CONSUMPTION

MINUTES WATER POWER

(2) LITRES KWh (2)

(1)

1 SOAK

2

SAVE +

3BIO (*)

EN 50242

4AUTO 60-70

ULTRA

5 CLEAN (****)

Pans and dishes
awaiting completion	Cold prewash
of the load.
Pans and dishes with	Cold prewash
	Wash at 60°C
normal dirt, even with
	Cold rinse
dried-on residues.
	Rinse at 50°C
	Dry
	Cold prewash
Dishes with normal	Wash at 50°C
dirt, even with dried-	Cold rinse
on residues.	Rinse at 62°C
	Dry
	Cold prewash
Pans and dishes with	Wash at 50°C
normal dirt, even with	Wash at 65°C
dried-on residues.	Cold rinse
	Rinse at 70°C
	Dry
Very dirty pans and	Prewash at 45°C
	Wash at 70°C
dishes, even with	2 cold rinses
dried-on residues.	Rinse at 70°C
	Dry

15' 4 0,03

175' 13 0,95

180' (**) (**)

(***) (***) (***)

140' 18 1,72

Only run the soak program with half loads.

The RAPID CYCLE (6), “3/1” (8), HALF LOAD WASH (10) and DELAYED START

(12)options cannot be used with the soak program.

(*)Reference program as per EN 50242 standard.

(**)See energy label.

(***)When the "AUTO 60-70" program is selected, the dishwasher recognises the type of dirt and automatically adjusts the washing parameters as appropriate.

(****) The "ULTRA CLEAN" program terminates with an anti-bacteria rinse that ensures a further reduction in the bacteria level. If the temperature falls during this stage of the program (e.g. because the door is opened or due to a power blackout), the program lights (2) flash to warn that the anti-bacteria effect is not guaranteed.

(1)Average power consumption with the softener set on level 2..

(2)The cycle duration and power consumption may vary according to the water and room temperatures, and the type and amount of dishes.

The washing cycle will not take place if the dishwasher door is left open or not properly closed.

11