Installation instructions, Drain Connection | Smeg STA643PQ specification

Image 7

Smeg STA643PQ manual Installation instructions, Connecting To The Water Supply, Drain Connection

Contents

GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS Contents NEVER BE REMOVED Safety instructions1. Safety and operating instructions USES OTHER THAN THOSE DESCRIBED ABOVE THIS DISHWASHER MUST BE USED BY ADULTS APPLIANCE AQUASTOP MODELS 2. Installation and hook-up Installation instructions2.1 Water supply connection DRAIN CONNECTION CONNECTING TO THE WATER SUPPLY NEVER DISCONNECT THE PLUG BY PULLING ON THE POWER SUPPLY LEAD 2.2 Electrical connection and precautionsIF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD FOR GREAT BRITAIN ONLY Fuse replacement 3.1 Upper panel User instructions3. Description of the controls SELECTED PROGRAM INDICATOR LIGHTS HALF LOAD BUTTON 13 INFORMATION DISPLAY SETTING THE WASHING PROGRAM AND SWITCHING ON“3/1” OPTION BUTTON “3/1” OPTION LIGHT The RAPID CYCLE 6, “3/1” 8, HALF LOAD WASH 10 and DELAYED START MINUTES POWERVery dirty pans DURATION RAPID CYCLES available in all programs except the soak program 3.2 Washing programsBefore starting a washing program make sure that The correct amount of detergent has been added to the dispenser available in all programs except the soak program SELECTING HALF LOAD WASHDELAYED START available in all programs except the soak program TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENT CANCELLING THE CURRENT PROGRAMCHANGING THE PROGRAM TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT REMOVING THE DISHES END OF CYCLE 4.1 Using the water softening system 4. Operating instructions ADJUSTING THE WATER SOFTENING SYSTEM WATER HARDNESS TABLE 4.2 Using the rinse aid and detergent dispensers ADDING THE RINSE AID ADJUSTING THE RINSE AID DISPENSER SETTING During the washing cycle, the dispenser will be opened automatically ADDING THE DETERGENT User instructions Correct loading of the dishes helps ensure optimal washing results 4.3 General warnings and recommendationsMAKE SURE that the items being washed are dishwasher-safe Dishes and objects in copper, tin, zinc or brass these tend to stain Items which are not dishwasher-safe LOWER BASKET 4.4 Using the basketsLOADING THE LOWER BASKET CUTLERY BASKET LOADING THE UPPER BASKET UPPER BASKET Depending on the models, the basket may be equipped with some or all of the following accessories Version B ADJUSTING THE UPPER BASKET User instructions 5.1 General warnings and recommendations 5. Cleaning and maintenanceCLEANING THE WATER INTAKE FILTER CLEANING THE SPRAY ARMS Fill the rinse aid dispenser Shut off the water supply tap CLEANING THE FILTER UNITGENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE PROLONGED DISUSE Reconnect the water intake hose and open the tap again TROUBLESHOOTING MINOR PROBLEMSIf the dishes are not being cleaned properly, check that BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE If the dishes show signs of streaking, staining, etc., check that If the dishes fail to dry or remain dull, check thatIf there are visible traces of rust inside the tank E1 E2 E3 E4 E5 E6 6. TroubleshootingFAULT Safety level Water intake system malfunction E7 E8 E9Turbine flow-regulator malfunction Alternate washing system malfunction Height depending on models Capacity Water supply pressure TECHNICAL DATAElectrical characteristics Width