Philips 37PF5520D/10 manual Mode selector, Installing your television set, ÉConnecting the aerials

Mode selector

Press the (SELECT) key to select the required mode : DVD or AUX (amplifier).The remote control indicator lights up to display the selected mode. It switches off

automatically after 20 seconds if left idle.The remote control automatically returns to TV mode.

The following keys are operational depending on the equipment :

standby OK validation

fast rewind

navigation and adjustments

fast forward

recording

digit keys

pause

stop programme selection

play

audio selection

tv menu

OSD menu

cancel

Installing your television set

& Positioning the television set

Place your TV on a solid stable surface.To avoid danger, do not expose the TV to water or a heat source (e.g. lamp, candle, radiator). Do not obstruct the ventilation grid at the rear

éConnecting the aerials

• Use the aerial connection lead supplied and connect the ¬ socket situated at the bottom of the TV to your aerial socket.

• Connect the power lead to the television and the mains plug into the wall socket (220-240V/50 Hz). For connecting other appliances, see pagess 18-19.

“Switching on

To switch on the set, press the POWER key. A green indicator comes on and the screen lights up. Go straight to the chapter “Switching on for the first time on page 5. If the television remains in standby mode, press the P(age) + key on the remote control.

The indicator will flash when you use the remote control.

4