Philips 37PF5520D/10 manual Using in PC monitor mode

Using in PC monitor mode

NOTE

–When using the TV as a PC monitor, slight diagonal interference lines may be observed when it is operated under electromagnetic interference environment but will not affect the performance of this product.

–For better performance, good quality DVI cable with good noise isolation filter is recommended.

PC Mode

Your TV can be used as a computer monitor. The PIP function lets you display a superimposed image to watch the TV channels at the same time. The PIP function only works if your PC has a digital output.You must first of all connect the computer and adjust the resolution (see p.18).

Choosing PC mode

&Press the AV key on the remote control to display the Source List.

éUse the o œ keys to select PC and

then press the cursor É key to switch the TV to PC mode (DVI In).

To return to TV mode, press the AV key, select TV and validate with É key.

Using PIP

While in PC mode you can call up a window for TV channels.

Attention: the PIP feature is only available if a computer is connected to the DVI In (see p. 21).

&Press the æ key to display the PIP screen. The television image is reproduced in a small

superimposed window.

éSubsequent presses of the æ key changes

the size of the window, switches to dual screen and turns PIP off.

“Use the P –/+keys to change the programmes of the PIP screen.

Using the PC menus

Press the MENU key to access the specific settings of the PC monitor mode. Use the cursor to adjust them (the settings are automatically saved):

• Picture:

-Brightness / Contrast : to adjust the brightness and contrast.

-Horizontal / Vertical* : to adjust the horizontal and vertical placing of the image.

-Colour Temp. : this changes the colour

rendering : Cold (bluer), Normal (balanced) or Warm (redder).

•Audio Selection: to choose the sound reproduced on the TV (PC/HD or TV).

•Features:

-Phase/Clock*: eliminates the horizontal

(Phase) and vertical (Clock) interfering lines.

-Format : to choose between full screen or native format of the PC screens.

-PIP : to adjust the size and position of the PIP screen.

-Auto Adjust*: position is set automatically.

•Reset To Factory Setting: to return to the factory settings (default settings).

*These adjustments are not available when a computer is connected to the DVI In .

Here is the list of the different display resolutions available on your TV :

	640 x 350 p	800 x 600 p	1152 x 864 p
Digital PC (DVI-I)	640 x 480 p	832 x 624 p	1280 x 960 p
	720 x 400 p	1024 x 768 p	1280 x 1024 p
Analogue PC (YPbPr)	640 x 350 p	720 x 400 p	832 x 624 p
	640 x 480 p	800 x 600 p	1024 x 768 p

16