Philips 37PF5520D/10 manual Automatic tuning of analogue programmes, Program sort

Automatic tuning of analogue programmes

This menu allows you to automatically search for all the analogue programmes available in your region.

&From the analogue mode, press the

(TV menu) key to display the main menu.

éWith Cursor (œ É ) keys to select Install and then Auto Store. Press É and the search begins. After several minutes, the Install menu reappears automatically.

TV Menu

Picture	Auto Store
Sound
Features	Program É	8
Install
	TV É	196 MHz

“If the transmitter or the cable network broadcasts the automatic sort signal, the programmes will be

correctly numbered.

‘If this is not the case, the programme will be numbered in descending order strating at 99, 98, 97, etc

Use the Sort menu to renumber them.

Some transmitters or cable networks broadcast their own sort parameters (region, language, etc). Where this is the case, make your choice using the o œ keys and confirm with the É key.

To exit or interrupt the search, press the key.

If no picture is found, refer to the chapter entitled Tips on p.20

( To exit from the menu, press key.

Program sort

&Press the key.The TV Menu is displayed on the screen.

TV Menu

Picture

Sound

Features

Install

éWith the cursor, select the Install menu followed by the Sort menu.

“Select the programme you want to move using the o œ keys and press É.

‘Then use the o œ keys to select the new number and validate with Ñ.

(Repeat steps “ and ‘ for each program you wish to renumber.

§ To quit the menus, press .

Manual tuning of analogue programmes

This menu is used to store the programmes one at a time.

&Press the (TV menu) key.

éWith Cursor (œ É ) keys to select Install and then Manual Store.

TV Menu	Manual Store
Picture	System	Europe
Sound
Features	Search
Install
	Program No.
	Fine Tune
	Store

“System : select Europe (automatic detection*) or Western Europe (BG standard), Eastern Europe (DK standard), United Kingdom

(I standard) or France (LL’ standard),

*Except for France (LL’ standard) : in this case, select the option FRANCE.

‘Search : press É key.The search starts. Once a programme is found, the scanning stops and its name is displayed (when available). Go to the

next step. If you know the frequency of the required programme, this can be entered directly

using the keys.

If no programme is found, refer to the Tips chapter on page 20.

(Program No : enter the required number with

the ÑÉ or (0 to 9) keys.

§Fine Tune : if the reception is not satisfactory, adjust using the ÑÉ keys.

èStore : press É key.The programme is stored. ! Repeat steps ‘ to è for each programme to

store.

ç To quit the menu, press key.

12