Recording pictures (basic)
Taking Pictures using Burst Mode
1 Press the Single/Burst Mode Button to switch the burst mode setting and then take pictures.
1600
19
: High speed
;
: Low speed
;
: No limit
;
No display (cancelled)
∫Number of pictures recorded in burst mode
Burst speed | Number of recordable |
(pictures/ | pictures (pictures) |
second)¢ |
|
|
3 | max. 4 | max. 7 |
4 | max. 5 | max. 10 |
2 |
|
|
| Depends on | Depends on |
2 | the card | the card |
| capacity | capacity |
¢When the shutter speed is higher than 1/60 and the flash is not activated
•In simple mode [] (P31), the burst speed is fixed to Low.
•Keep pressing the shutter button fully to activate the burst mode.
•If the flash is activated, you can record only 1 picture.
•When the
•When the burst mode is activated, the audio recording function on
•When setting auto bracket and the burst mode simultaneously, auto bracket will be performed by default.
•When the burst mode setting is set to no limit, the speed of taking pictures becomes slow during a recording in burst mode.
•Burst mode will not perform as described if a MultiMediaCard is used in place of an SD Memory Card. The reading/writing speed of a MultiMediaCard is slower than that of an SD Memory Card.
•The setting of auto review function is fixed to [1SEC.]. (The picture is not enlarged.)
•Burst mode is not cancelled when the camera is switched off.
43