Preparation

Charging the Battery with the Charger

When the camera is shipped, the battery is not charged. Charge the battery before use.

1 Attach the battery with attention to the direction of the battery.

2 Connect the AC cable.

3 Detach the battery.

After charging is completed, be sure to disconnect the AC cable from the electrical outlet.

The battery becomes warm after use/ charge or during charge. The camera also becomes warm during use. However, it is not a malfunction.

Use the dedicated charger and battery.

Charge the battery with the charger indoors.

Do not disassemble or modify the charger.

The AC cable does not fit entirely into the AC input terminal. A gap will remain as shown below.

When the [CHARGE] indicator A lights in green, charging starts.

When the [CHARGE] indicator A turns off (in about 120 minutes), charging is completed.

11

Page 11
Image 11
Panasonic DMC-FX2GN, DMC-FX7GN operating instructions Charging the Battery with the Charger