Connecting to a PC or Printer

Connecting to a PC

Refer to the separate operating instructions about PC connection.

If you use Windows 98/98SE, install the USB driver and then connect it to the computer.

When using Windows Me/2000/XP, Mac OS 9.x and Mac OS X, you do not have to install the USB driver.

DIGITAL

AV OUT

DC IN

1 Turn the camera on and set the [USB MODE] according to the OS you use.

Set to [PC] or [PictBridge (PTP)]. Refer to “Before Connecting with USB Connection Cable” on page 82.

If [USB MODE] is set to [PictBridge (PTP)] while Windows XP or Mac OS X is used, it is connected as PTP.

2 Connect the camera to a PC via the USB connection cable B (supplied).

Connect the USB connection cable with

the [] mark facing the [1] mark on the [DIGITAL] socket.

Hold on the plug body C and push in to the socket.

Depending on the USB mode setting, the indications on the screen may vary. Refer to page 85.

A: AC adaptor (DMW-CAC2; optional)

B: USB connection cable (supplied)

84

Page 84
Image 84
Panasonic DMC-FX7GN, DMC-FX2GN operating instructions Connecting to a PC