Panasonic DMC-FX7GN Connecting to a PictBridge-compliant Printer, PICTURE. P88, PICTURE. P87

Models: DMC-FX2GN DMC-FX7GN

1 104
Download 104 pages 33.38 Kb
Page 86
Image 86

Connecting to a PC or Printer

Connecting to a PictBridge-compliant Printer

By connecting the camera directly to a printer supporting PictBridge via the USB connection cable (supplied), you can select the pictures to be printed or start printing.

DIGITAL

AV OUT

DC IN

A: USB connection cable (supplied)

B: AC adaptor (DMW-CAC2; optional)

1 Turn the camera on and then set the USB mode to [PictBridge (PTP)]. (P82)

2 Turn on the printer.

3 Connect the camera to a printer via the USB connection cable A (supplied).

Connect the USB connection cable with

the [] mark facing the [1] mark on the [DIGITAL] socket.

Hold on the plug body C and push in to the socket.

 

When the DPOF

 

Select [DPOF

 

Print is set. (P71)

 

PICTURE]. (P88)

 

 

 

 

 

When the DPOF

 

Select [SINGLE

 

Print is not set.

 

PICTURE]. (P87)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If the remaining battery power becomes low during communication, the status indicator turns red, starts to blink (P12) and the alarm beeps. In this case, stop the communication at once, turn the camera off, replace the battery with a charged one or charge the battery, or use the AC adaptor (DMW-CAC2; optional).

Set the print settings such as print quality on the printer beforehand. Ask the manufacturer of the printer about the corresponding models. (Read the printer operating instructions too.)

It may take time to print some pictures. Therefore, we recommend using a battery with sufficient power (P12) or the AC adaptor (DMW-CAC2; optional) when you connect to a printer.

Disconnect the USB connection cable after printing.

Do not use any other USB connection cables except the supplied one.

86

Page 86
Image 86
Panasonic DMC-FX7GN, DMC-FX2GN Connecting to a PictBridge-compliant Printer, PICTURE. P88, PICTURE. P87