Recording pictures (basic)
Taking Pictures using Auto Bracket
In this mode, 3 pictures are automatically recorded by each press of the shutter button according to the compensation range of the exposure.
You can select the desired exposure among the 3 types of pictures.
1 Press 3 several times until
[ 
AUTO BRACKET] appears and then set the compensation range of the exposure.
AUTO BRACKET
SELECT
EXIT
•You can select the exposure from j1 EV to i1 EV in steps of 1/3 EV.
•When you do not use auto bracket, select [OFF].
•When setting the auto bracket, the auto bracket icon appears on the lower left of the screen.
•When taking pictures using auto bracket after the exposure compensation, the pictures are based on the compensated exposure.
When the exposure is compensated, the compensated exposure value appears on the screen.
•When the flash is activated, you can take only 1 picture.
•When setting auto bracket, you cannot use the audio recording function on
•When setting auto bracket and the burst mode simultaneously, auto bracket will be performed.
•The exposure may not be compensated with auto bracket depending on the brightness of the subject.
•The setting of auto review function is fixed to [1SEC.]. (The picture is not enlarged.)
•Auto bracket is cancelled after switching the camera off.
41
