12 | PC*MILERAS/400 MVS User’s Guide |
|
|
|
|
3)Install the correct version of PC*MILERTCP/IP Connect for each version of PC*MILER that you will be using. Pay strict attention to which version you are installing.
4)Install PC*MILERAS/400 Multiple Version Switch (ALKMVS) by following the steps below.
Step 1:
Make sure the Netsoft Router or Client Access Express is installed and working on the PC (see Appendix B: Configuring an N/S Router for Use with PC*MILER AS/400 or Appendix D: Confiquring Client Access Express for Use with PC*MILER AS/400).
⇒NOTE For NS Router Users: PC*MILER for the AS/400 is built on a specific Netmanage Data Queue DLL. This DLL, E32DQW.DLL dated 12/18/98, is only on the PC*MILER CD. If you install any Netmanage software after installing the PC*MILER for the AS/400 interface software, you run the risk of getting the wrong version of this critical file, and unpredictable behavior may result.
Step 2:
Insert the PC*MILERAS/400 Multiple Version Switch Windows Install
Disk.
On the CD are the following folders:
MVSInst
V14
V151
V161
V17
You can install any version you are licensed for. If you are installing the PC*MILERStreets
You can install all four versions of PC*MILER on one PC, or you can install each version on its own PC (the PC’s must be networked).
