PC*MILER|AS/400 MVS User’s Guide 13
Step 2.1
For Version 14:
• Run <cdrom>\v14\setup.exe
• If you are installing just PC*MILER 14.0 you will not need a product
key code.
• If you are intalling an approved PC*MILER|AS/400 Multiple Version
Switch data add-on, you will need a product key code.
• Without a product key code, check only the PCMILER 14.0 box and
then use Pcd1400001 for the serial number.
The default install location is C:\Pmw140. If you change this, you will need
to make adjustments later in the installation. Remember your installation
location. You do not need to reboot the PC as directed.
Step 2.2
For Version 15.1:
• Run <cdrom>\v151\setup.exe
• If you are installing just PC*MILER 15.0 you will not need a product
key code.
• If you are intalling an approved PC*MILER|AS/400 Multiple Version
Switch data add-on, you will need a product key code.
• Without a product key code, check only the PCMILER 15.0 box .
The default install location is C:\Pmw150. If you change this, you will need
to make adjustments later in the installation. Remember your installation
location. You do not need to reboot the PC as directed.
Step 2.3
Version 16.1:
• Run <cdrom>\v161\setup.exe
• If you are installing just PC*MILER 16.1 you will not need a product
key code.
• If you are intalling an approved PC*MILER|AS/400 Multiple Version
Switch data add-on, you will need a product key code.
• Without a product key code, enter ‘Trial’ in the Registration Number
dialog.
Do not choose PC*MILER|Streets unless you have previously licensed it
from ALK and have the Street Level Data CD.