Alliance Laundry Systems 802715 manual

Installation Instructions

for Stacked Washers and Dryers

Date Purchased ________________Model Number ________________Serial Number _________________

Para bajar una copia de estas instrucciones en español, visite www.comlaundry.com.

Keep these instructions for future reference.(If this machine changes ownership, this manual must accompany machine.)

	Part No. 802715
www.comlaundry.com	December 2006

Contents

Installer Checklist Back Cover Date Purchased Model Number WARNING •WHAT TO DO IF YOU SMELL GAS: –Do not try to light any appliance –Do not touch any electrical switch; do not use any phone in your building –Clear the room, building or area of all occupants Dimensions Before You Start Supplies Installation Step 1: Position Unit Near Installation Area Step 2: Connect Fill Hoses Water Supply Connecting Hoses Step 3: Connect Drain Hose to Drain Receptacle Standpipe Installation: Wall Installation: Laundry Tub Installation: Step 4: (Gas Dryer Only) Connect Gas Supply Pipe Step 5: (Electric Dryer Only) Connect Electrical Plug Grounding Information Connecting Power Cord with Three-WirePlug Connecting Power Cord with Four-WirePlug 3.Remove ground screw and save for use in Step 5. Remove wire and use in Step 4.Use a strain relief and insert end of power cord through power supply hole a.Red wire to “L1” terminal b.Black wire to “L2” terminal c.White wire to Neutral terminal Step 6: Connect Dryer Exhaust System Exhaust Direction Exhaust System Step 7: Position and Level the Unit NOTE: Level must rest on raised portion of top panel. Refer to Figure Step 8: (Washer Only) Remove the Shock Sleeves and Shipping Brace Step 9: Wipe Out Inside of Washer Drum and Dryer Drum Step 10: Plug In the Washer and Dryer Electric Dryer Gas Dryer Washer Step 11: Recheck steps Step 12: Check Heat Source Electric Dryers Gas Dryers Page Page Fast Track for Installing the Unit