Alliance Laundry Systems 802715 23

Contents

Installer Checklist Back Cover Date Purchased Model Number WARNING •WHAT TO DO IF YOU SMELL GAS: –Do not try to light any appliance –Do not touch any electrical switch; do not use any phone in your building –Clear the room, building or area of all occupants Dimensions Before You Start Supplies Installation Step 1: Position Unit Near Installation Area Step 2: Connect Fill Hoses Water Supply Connecting Hoses Step 3: Connect Drain Hose to Drain Receptacle Standpipe Installation: Wall Installation: Laundry Tub Installation: Step 4: (Gas Dryer Only) Connect Gas Supply Pipe Step 5: (Electric Dryer Only) Connect Electrical Plug Grounding Information Connecting Power Cord with Three-WirePlug Connecting Power Cord with Four-WirePlug 3.Remove ground screw and save for use in Step 5. Remove wire and use in Step 4.Use a strain relief and insert end of power cord through power supply hole a.Red wire to “L1” terminal b.Black wire to “L2” terminal c.White wire to Neutral terminal Step 6: Connect Dryer Exhaust System Exhaust Direction Exhaust System Step 7: Position and Level the Unit NOTE: Level must rest on raised portion of top panel. Refer to Figure Step 8: (Washer Only) Remove the Shock Sleeves and Shipping Brace Step 9: Wipe Out Inside of Washer Drum and Dryer Drum Step 10: Plug In the Washer and Dryer Electric Dryer Gas Dryer Washer Step 11: Recheck steps Step 12: Check Heat Source Electric Dryers Gas Dryers Page Page Fast Track for Installing the Unit