After the dryer has operated for approximately five minutes, observe burner flame through lower front panel. Adjust the air shutter to obtain a soft, uniform blue flame. (A lazy, yellow-tipped flame indicates lack of air. A harsh, roaring, very blue flame indicates too much air.) Adjust the air shutter as follows:

1.Loosen the air shutter lockscrew.

2.Turn the air shutter to the left to get a luminous yellow-tipped flame, then turn it back slowly to the right to obtain a steady, soft blue flame.

3.After the air shutter is adjusted for proper flame, tighten the air shutter lockscrew securely.

4.Reinstall the lower front panel.

WARNING

For personal safety, lower front panel must be in place during normal operation.

W046

After the dryer has operated for approximately three minutes, exhaust air or exhaust pipe should be warm.

1

2

4

 

 

 

3

 

 

 

D702I

 

 

 

D702I

1

Air Shutter Lockscrew

3

Air Shutter

2

Appliance Main Gas Valve

4

1/8 in. (3.1 mm) Pipe Plug

 

 

 

(For checking manifold pressure)

Figure 28

22

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

802715