Installation

AC Drive Connections

Power Supply

 

Input Power

R S T

U V W

Block on

Washer-Extractor

 

 

Motor Leads

Main Drive Motor

MV001F

Figure 27

8.Cylinder rotation must be clockwise in a spin step for 35-pound, 50-pound, and

85-pound capacity models. On 135-pound and 250-pound models, rotation should be counterclockwise in an extract step. If rotation is not correct, disconnect power. A qualified electrician must reverse any two leads between the AC drive and the main drive motor. See Figure 27.

If the washer-extractor is served by the Premium Wet Clean Module, continue the control function test by following the procedure listed below.

43

F232058