Installation

Out-of-Balance Switch

1

2

CFS501N

1Window

2Probe

Figure 17

The out-of-balance switch is mounted on the upper right side on the back of the control panel. There is a window around the probe of the switch that is mounted on the movable part of the machine.

When the machine goes out of balance by overloading or uneven distribution of the linen, the out-of-balance switch will interrupt this action to prevent damage to the machine.

IMPORTANT: To guarantee good functioning, the probe should be centered horizontally and vertically at 1/3 from the bottom of the tilt window (when machine drum is empty).

26

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

9001909