Motor Overload Protector
The dryer’s motor overload protector stops the motor automatically in the event of an overload. After cooling, the overload protector will reset itself. Dryer can be restarted by pressing the
Maintenance
For Energy Conservation
•Make sure the lint filter is always clean.
•Do not overload dryer.
•Do not overdry clothes.
•Remove items to be ironed while still damp.
•Large loads of similar fabrics dry the most efficiently. However, dry permanent press in smaller loads to prevent wrinkling.
•Use the correct temperature FABRIC SELECTOR setting for the type of fabric being dried.
•Locate your dryer so the exhaust duct is as short and straight as possible.
•Do not open the door during the drying cycle.
•Plan to do your laundry on low humidity days; your clothes will dry faster.
•Should you plan to dry several loads, do them one after another, then you do not have to reheat the dryer unit’s interior parts each time.
513220 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 29 |
