Step 7: Start Washer
After vend price has been satisfied, push the START pad. DOOR MUST BE CLOSED TO START WASHER.
NORMAL | PERM | DELICATES | |
PRESS | |||
|
| ||
HOT |
|
|
H207I
H207I
Figure 38
Indicator Lights
WASH
WASH is lit at the beginning of a wash cycle and will remain lit until the wash cycle is complete.
RINSE
RINSE is lit at the beginning of the RINSE or EXTRA RINSE cycle and will remain lit until the rinse cycle is complete.
SPIN
SPIN is lit for all spin cycles.
DOOR LOCKED
DOOR LOCKED is lit whenever the door is locked. The door cannot be opened when this light is on.
Operation
INSERT COIN/CARD
INSERT COIN/CARD is lit to prompt the user to insert coins or card to satisfy the vend price. When INSERT COIN/CARD is lit, the digits and decimal point show the vend price remaining to be satisfied.
REMOVE CARD (Card Models Only)
REMOVE CARD flashes after the START pad has been pressed and the vend has been deducted from the card.
IMPORTANT: If washer fails to operate properly after installation, make sure electrical service and water supply faucets are turned on. Are all the controls properly set? Have a qualified service person refer to the wiring diagram (located inside of washer control hood) and check for broken, loose or incorrect wiring.
NOTE: Once a cycle has started, the door can only be opened by first unplugging the power cord and waiting one minute.
WARNING
To reduce the risk of bodily injury, do not remove laundry from washer until all lights are out, and all moving parts have stopped.
W092
802734 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 27 |
