Moving Washer to a New Location
To prevent damage while moving the washer, the shipping materials MUST be reinstalled.
Reinstallation of Shipping Materials
Disconnect washer from electrical supply.
Remove front access panel by removing two screws.
Place the shock sleeves on all four shock absorbers. Refer to illustration.
Insert hooked end of shipping brace into the open slot of the motor mount. Attach with bolts and washers. Refer to illustration.
Reinstall front access panel.
1
2
4 
3
H336I
1Shock Sleeves
2Motor Mount
3Bolts and Washers
4Hooked End of Shipping Brace
Refer to Installing the Washer section for proper procedures whenever the washer is moved and is ready for reinstallation.
685980 | 13 |