Start a Program

Cycle 00

Cycle 23

No Cycle 23

Please close

door

Restaurant 2

S01 C23 0:04:59 80°F High

Operation

After powering up the control, “Cycle 00” will show on the display.

Press the desired program number (example: program 23).

The display will show the cycle (example: “Cycle 23”).

Press “Start” to run the program.

If the program does not exist, the display will show “No Cycle 23”. See program mode to create a program.

If the door is not closed, the display will show “Please close door”. After closing the door the program will start.

If the door is closed and the program exists, the program will start. The name of the program will show on the display for 2 seconds and the machine will start.

When the machine is started the display will show the following information.

S01: Step 1

C23: Program number 23

0:04:59: The time of step 1. This will count down to

 

0 and then go to step 2 (S02).

80°F:

The temperature of the bath that is

 

programmed.

High:

The water level in step 1 that is

 

programmed.

9001001

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

13