Operation
Error Messages
Door error
Didn’t fill within time
Enter to retry
Clear to stop
Done Cycle CC
Please open door
Didn’t fill within time
During step N
(CC = cycle number;
N = step number in which the alarm occurred).
Door Error
If the door is closed after start the control will try to lock the door. If the door will not lock “Door error” will display.
Possible Faults:
●Wiring is not connected properly.
●Coil to lock the door has failed.
●Mechanical problem on the door lock.
Fill Alarm
If machine does not reach programmed water level within time programmed for step, a fill alarm occurs. Machine will continue filling and agitating, while sounding beeper and flashing “Didn’t fill within time” on display.
Condition will continue for up to two (2) minutes. If programmed water level is reached before two minute fill alarm time ends, condition ends, and machine resumes operation. If Enter key is pressed during fill alarm, condition will end and step will start over. If programmed water level is not reached within programmed step time, fill alarm will occur again. If Clear (STOP) key is pressed while fill alarm is in effect, cycle will end, and door will unlock. If no action is taken, and fill level is not reached within two minute alarm time limit, cycle will end and door can be unlocked (provided no water level is sensed). Whenever a fill alarm occurred during a cycle, display will repeat following messages at end of stop routine, before door is opened, to indicate alarm condition occurred in cycle.
16 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 9001001 |