Alliance Laundry Systems Special Options in Run Mode, Advance Mode, Chemical Hold Feature

Operation

Special Options in Run Mode

S01 C23 0:04:59 80°F High

Level : 2.5 cm 62°F 40rpm L

S01 C23 0:04:59 80°F High

While the machine is running press the “Display Temp” button.

Level:	2.5 cm: Water level in the bath. If the
	machine is filling with water this value will
	increase. If in a drain step this value will
	decrease.
62°F:	The water temperature.
40rpm:	The measured rpm of the drum.

L:Rotation direction of the drum L (left), R (right)

Press the “Display Temp” button to go back.

Advance Mode

Press the “Advance” button to proceed to the next step in the program.

Chemical Hold Feature

Chemical supply injection can be paused. Refer to section Setup of the Chemical Hold Feature in Programming manual.

14 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001001