Alliance Laundry Systems NX18BVPA6, NX18BVQA6, NX18BVXA6, NX30BVPA6, NX30BVQA6, NX30BVXA6 Removing the Transport Block

	Installation/Operation Supplement
Removing the Transport Block	IMPORTANT: Do NOT remove panel braces.
	Refer to Figure 5.
	Refer to Figure 5.

WARNING

The machine must never be activated before removing the transport block.

W618

To prevent damage during transportation, machine has been equipped with a transport block. To remove, proceed as follows:

1.Place machine on level ground.

2.Remove service panels and back panel.

3. At rear of machine, lift at bottom of motor and remove transport block. Refer to Figure 4.

CFS486N

1 Panel Braces (Do NOT Remove)

Figure 5

4. Replace all panels removed.

CFD26N

1Transport Block (Remove)

Figure 4

IMPORTANT: Do NOT lift motor by the pulley.

9002062 (EN)

Alliance Laundry Systems Removing the Transport Block