Removing the Transport Block
WARNING
The machine must never be activated before removing the transport block.
W618
To prevent damage during transportation, machine has been equipped with a transport block. To remove, proceed as follows:
1.Place machine on level ground.
2.Remove service panels and back panel.
3.At rear of machine, lift at bottom of motor and remove transport block if present. Refer to Figure 4.
1
CFD26N
CFD26N
1Transport Block (Remove)
Installation/Operation Supplement
IMPORTANT: Do NOT remove panel braces. They may be located in either the front or on the side and rear of the machine. Refer to Figure 5.
CFD34N
1 | CFD515N |
|
Figure 4
IMPORTANT: Do NOT lift motor by the pulley.
1
1Panel Braces
CFD34N
CFD515N
9002062 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 13 |