Installation
Dimensional Clearances
Refer to Figure 5 for recommended dimensional clearances.
1/2 in.
(13 mm)
6 in. |
|
|
|
| 6 in. | ||
(152 mm) |
|
|
|
|
|
| (152 mm) CAR10N |
|
|
|
| ||||
CAR10N
Figure 5
Machine Foundation
The machine may be placed on any level floor as long as floor will hold the weight of the machine.
Position the machine and level with shims or grout under the corners.
Refer to Table 3 for static loads on the floor.
Machine Anchoring
Bolting to floor is optional. To bolt down the machine, use 3/8 inch bolt holes located on the frame at the bottom of each corner. One quarter inch machine anchors should be used.
Floor Load Data |
|
|
|
Specification |
|
|
|
Static floor load | 840 lbs. |
| (3.7 kN) |
|
|
Static pressure | 68 |
(3.3
Table 3
F232212 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | 11 |