Maintenance

Care of Stainless Steel

•Remove dirt and grease with detergent and water. Thoroughly rinse and dry after washing.

•Avoid contact with dissimilar metals to prevent galvanic corrosion when salty or acidic solutions are present.

•Do not allow salty or acidic solutions to evaporate and dry on stainless steel. Wipe clean of any residues.

•Do not leave sanitizers or sterilizing solutions on stainless steel equipment for prolonged periods of time.

•When an external chemical supply is used, ensure no siphoning of chemicals occurs when the washer-extractor is not in use. Highly concentrated chemicals can cause severe damage to stainless steel and other components with the machine. Damage of this kind is not covered by the manufacturer’s warranty. Locate the pump below the washer-extractor’s injection point to prevent siphoning of chemicals into the machine.

•If the stainless steel appears to be rusting, the source of the rust may actually be a foreign piece of iron or steel part not made of stainless steel, such as a nail or screw contacting the stainless steel surface. Tip: Paint all carbon steel parts with a heavy protective coating. Stainless steel fasteners should be used whenever possible.

22

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

F232212